The ameliorative effect of kaempferol against CdCl2- mediated renal damage entails activation of Nrf2 and inhibition of NF-kB

Environmental Science and Pollution Research - This study evaluated the nephroprotective effect of kaempferol against cadmium chloride (CdCl2) -induced nephropathy in rats. It also investigated if...     

Preparation of lactic acid modified cellulose nanoparticles by microwave heating for preconcentration of copper from blood and food samples

In this study, nano-sized cellulose modified with lactic acid (MW-Ce-LA) was prepared with the assistant of microwave then used for the adsorption of Cu²⁺ from real samples. This modified cellulose was characterized by means of FTIR, TEM, XRD, and elemental analysis. ICP-OES was used for determination of Cu²⁺. The effect of pH, adsorption times, temperature, sorbent dose, and initial adsorbate concentration were studied to detect the ideal adsorption condition. Langmuir model proved to be the best to fit the adsorption isotherm experiments with maximum adsorption capacity of 90.3 mg g^?1 Cu²⁺. Calculated thermodynamic parameters (ΔG° and ΔH°) for adsorption of Cu²⁺ on MW-Ce-LA suggested exothermic and nonspontaneous character of the adsorption process. The reusability tests indicated regeneration of the prepared adsorbent simply using 1 mol L^?1 of HCl. The examined method was used effectively to preconcentrate Cu²⁺ from water, blood, and food samples.

     

A novel multi-model data-driven ensemble approach for the prediction of particulate matter concentration

Environmental Science and Pollution Research - Accuracy in the prediction of the particulate matter (PM2.5 and PM10) concentration in the atmosphere is essential for both its monitoring and...     

Land spreading of olive mill wastewater: effects on soil microbial activity and potential phytotoxicity

Extremely high organic load and the toxic nature of olive mill wastewater (OMW) prevent their direct discharge into domestic wastewater treatment systems. In addition to the various treatment schemes designed for such wastewater, controlled land spreading of untreated OMW has been suggested as an alternative mean of disposal. A field study was conducted between October 2004 and September 2005 to assess possible effects of OMW on soil microbial activity and potential phytotoxicity. The experiment was carried out in an organic orchard located on a Vertisol-type soil (Jezre'el Valley, Israel) and included two application levels of OMW (36 and 72m(3)ha(-1)). Total microbial counts, and to less extent the hydrolytic activity and soil respiration were increased following the high OMW application level. A bench-scale lab experiment showed that the rate of OMW mineralization was mainly dependent on the general status of soil activity and was not related to previous acclimatization of the soil microflora to OMW. Soil phytotoxicity (% germination and root elongation) was assessed in soil extracts of samples collected before and after each OMW application, using germinating cress (Lepidium sativum L.) seeds. We found direct short-term effect of OMW application on soil phytotoxicity. However, the soil was partly or completely recovered between successive applications. No further phytotoxicity was observed in treated soils as compared with control soil, 3 months after OMW application. Such short-term phytotoxicity was not in correlation with measured EC and total polyphenols in the soil extracts. Overall, the results of this study further support a safe controlled OMW spreading on lands that are not associated with sensitive aquifers.     

Application of cleaner production technology in chemical industry: a near zero emission

The main objective of this study is to investigate and evaluate opportunities for implementation of pollution prevention and waste minimization in a chemical industrial company producing poly sulfonated naphthalene formaldehyde which is used as a super plasticizer for concrete. Environmental problems encountered were mainly the highly polluted wastewater and a semi-solid cake containing considerable amount of the final product. Possible modules for remedial measures and their cost estimation were investigated. The proposed remedial modules included recycling of retained water discharge in filter press, recycling of washing water of reaction vessels (reactors), closed circuit cooling system for high-pressure pump, good housekeeping through control of leakage of raw material, products and water and finally utilization of retained residual product from the solid waste. The implemented pollution control measures proved to be cost effective and have short payback periods. Also, minimization of the hydraulic and organic loads in the final effluent was achieved.     

Effect of different fertilizers on methane emission from a paddy field of Zhejiang, China

ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｃｒｅａｓｅｄａｇｒｉｃｕｌｔｕｒａｌｐｒｏｄｕｃｔｉｖｉｔｙｏｖｅｒｔｈｅｐａｓｔ５０—１００ｙｅａｒｓｈａｓｌｅｄｔｏｉｎｃｒｅａｓｅｄａｔｍｏｓｐｈｅｒｉｃｃｏｎｃｅｎｔｒａｔｉｏｎｓｏｆＣＯ２，ＣＨ４ａｎｄＮ２Ｏ．Ｔｈｅｓｅｇａｓｅｓ，ａｌｏｎｇｗｉｔｈａｄｄｉｔｉｏｎｔｒａｃｅｇａｓｓｐｅｃｉｅｓ（ｇｒｅｅｎｈｏｕｓｅｇａｓｅｓ）ａｒｅｃａｕｓｉｎｇａｎｉｎｃｒｅａｓｅｉｎｇｌｏｂａｌｔｅｍｐｅｒａｔｕｒｅｓａｎｄｏｚｏｎｅｄｅｐｌｅｔｉｏｎ（Ａｓｅｌｍａｎ…     

Crude oil and hydrocarbon-degrading strains of Rhodococcus rhodochrous isolated from soil and marine environments in Kuwait

Soil and marine samples collected from different localities in Kuwait were screened for microorganisms capable of oil degradation. Both fungi and bacteria were isolated. The fungal flora consisted of Aspergillus terreus, A. sulphureus, Mucor globosus, Fusarium sp. and Penicillum citrinum. Mucor globosus was the most active oil degrading fungus isolated. Bacterial isolates included Bacillus spp. Enterobacteriaceae, Pseudomonas spp., Nocardia spp., Streptomyces spp.,and Rhodococcus spp. Among these Rhodococcus strains were the most efficient in oil degradation and, relatively speaking, the most abundant. Bacterial and fungal isolates differed in their ability to degrade crude oil, with Rhodococcus isolates being more active that fungin in n-alkane biodegradation, particularly in the case of R. rhodochrous. In addition to medium chain n-alkanes, fungi utilized one or more of the aromatic hydrocarbons studied, while bacteria failed to do so. R. rhodochorous KUCC 8801 was shown by GLC and post-growth studies to be more efficient in oil degradation than isolates known to be active oil degraders.     

Occurrence of pesticides and polychlorinated biphenyls in water of the Nile river at the estuaries of Rosetta and Damiatta branches, north of Delta, Egypt

A study was conducted from summer 1995 to summer 1997 to assess the seasonal occurrence of pesticide residues and other organic contaminants, polychlorinated biphenyls (PCBs), in water at the estuaries of Rosetta and Damiatta branches of the Nile river. The results indicated that organochlorine compounds (OCs) including HCB, lindane, p,p'-DDE, p,p'DDD, p,p'-DDT, aroclor 1254 and aroclor 1260 were present in all the water samples at concentration levels ranging between 0.195-0.240, 0.286-0.352, 0.035-0.067, 0.019-0.033, 0.024-0.031, 0.390-0.70 and 0.166-0.330 microgram/l, respectively. The levels of these compounds were higher in water of Damiatta branch than those found in water of Rosetta branch. Aldrin, dieldrin and endrin were not detected in all water samples. Only 4 compounds from 36 organophosphorus insecticides, fungicides and s-triazine herbicides tested were detected in water samples collected during summer and autumn seasons from Rosetta branch. The concentration levels of these detected compounds, dimethoate, malathion, captan, and ametryne, ranged from 0.011 to 0.340 microgram/l, respectively. Similar compounds during the same seasons as found in water of Rosetta branch were also detected in water of Damiatta branch except ametryne. The levels of the detected compounds (dimethoate, malathion and captan) ranged between 0.030 and 0.330 microgram/l. The levels of detected organophosphorus insecticides, fungicides and s-triazine herbicides were in the order: dimethoate > malathion > captan > ametryne.     

Stabilization/solidification of fly ashes and concrete production from bottom and circulating ashes produced in a power plant working under mono and co-combustion conditions

Two combustion tests were performed in a fluidized bed combustor of a thermo-electric power plant: (1) combustion of coal; (2) co-combustion of coal (68.7% w/w), sewage sludge (9.2% w/w) and meat and bone meal (MBM) (22.1% w/w). Three samples of ashes (bottom, circulating and fly ashes) were collected in each combustion test. The ashes were submitted to the following assays: (a) evaluation of the leaching behaviour; (b) stabilization/solidification of fly ashes and evaluation of the leaching behaviour of the stabilized/solidified (s/s) materials; (c) production of concrete from bottom and circulating ashes. The eluates of all materials were submitted to chemical and ecotoxicological characterizations. The crude ashes have shown similar chemical and ecotoxicological properties. The s/s materials have presented compressive strengths between 25 and 40 MPa, low emission levels of metals through leaching and were classified as non-hazardous materials. The formulations of concrete have presented compressive strengths between 12 and 24 MPa. According to the Dutch Building Materials Decree, some concrete formulations can be used in both scenarios of limited moistening and without insulation, and with permanent moistening and with insulation.     

Enhancement of Tensile Strength and Flexibility of Polycaprolactone/Tapioca Starch Blends by Octadecylamine Modified Clay

Polycaprolactone/tapioca starch/octadecylamine modified clay (OMMT) nanocomposites were successfully prepared by melt blending. X-ray diffraction and transmission electron microscopy (TEM) of the products showed that they are nanocomposites of a mixture intercalated and exfoliated types. In addition, the TEM also revealed that the OMMT layers are homogeneously distributed in the polymer matrix. The presence of 1 php of OMMT improved the compatibility of the polymers in the blends which consequently increased the tensile strength of the blend of more than 60% and elongation at break of more than 1,000%.